1)Contrast
Adjusts the Contrast.
2)Brightness
Adjusts the Brightness.
Note
• By adjusting the picture using the Custom function, MagicBright will change to Custom mode.
Color Tone 
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The color tones can be changed.
1)Off
2)Cool
3)Normal
4)Warm
5)Custom
(Available in PC, BNC mode only)
Note
•If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled.
•If you set the Color Tone to Off, the Color Control function is disabled
Color Control 
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >] → [ENTER] Adjusts the individual R, G, B color controls.
(Available in PC, BNC mode only)
1)Red
2)Green
3)Blue
Note
•If you adjust the picture by using the Custom function, Color Tone will turn to the Cusome mode.
•SOURCE - DVI_VIDEO, DVI Source - PC DVI : Not available
Color Temp 
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
Color Temp is a measure of the 'warmth' of the image colors. (This function is only enabled if the Color Tone is set to Off.)
Brightness Sensor 
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness.
1)On
2)Off