2.Turn￿off￿the￿computer,￿remove￿your￿old￿hard￿drive,￿and￿insert￿ the￿new￿one￿into￿your￿computer.￿(See￿“Using￿the￿Hard￿Drive”￿ on￿page￿33￿for￿instructions.)

3.If￿you￿have￿a￿CD-ROM￿drive,￿install￿the￿CD-ROM￿drive￿in￿the￿SmartBay￿and￿attach￿the￿floppy￿drive￿to￿the￿external￿floppy￿ connector.￿(See￿“Using￿the￿SmartBay”￿on￿page￿26￿and￿see￿ “Connecting￿the￿Floppy￿Drive￿to￿the￿Floppy￿Connector”￿on￿ page￿24￿for￿instructions.)

4.Under￿the￿Boot￿menu￿in￿System￿Setup,￿set￿Diskette￿Drive￿as￿the￿ first￿boot￿device￿and￿CD-ROM￿Drive￿as￿the￿second.￿(see￿“Using￿System￿Setup”￿￿for￿information￿on￿setting￿options.)

5.Insert￿the￿bootable￿disk￿into￿the￿floppy￿drive￿and￿start￿your￿ computer.￿

6.After￿your￿system￿boots,￿remove￿the￿startup￿disk￿from￿the￿ floppy￿drive￿and￿insert￿the￿PHDISK￿disk.

7.At￿the￿A:￿prompt,￿type:phdisk￿/c￿266240￿/p￿and￿then￿press￿<Enter>.

PHDISK￿automatically￿creates￿a￿save￿to￿disk￿partition￿of￿the￿ maximum￿size￿for￿your￿computer.

When￿the￿save￿to￿disk￿partition￿has￿been￿created,￿the￿following￿ message￿appears:￿

Save￿to￿disk￿partition￿created￿ successfully

8.Remove￿the￿PHDISK￿floppy￿disk￿from￿the￿floppy￿drive￿and￿ insert￿the￿startup￿disk.

9.Use￿the￿FDISK￿utility￿in￿DOS￿to￿create￿user￿partitions￿on￿your￿ drive,￿and￿then￿restart￿your￿computer.￿Be￿careful￿not￿to￿delete￿ the￿non-DOS￿partition￿that￿you￿just￿created￿with￿PHDISK.

10.Use￿the￿Format￿command￿to￿format￿the￿new￿partitions,￿and￿then￿ restart￿your￿computer.

11.Remove￿the￿startup￿disk￿and￿turn￿off￿your￿computer.12.Do￿one￿of￿the￿following￿to￿reinstall￿your￿applications:
Samsung￿M6000￿User’s￿ManualCreating￿a￿Save￿to￿Disk￿Partition￿￿￿66