Viewing the Various Functions on | Setting the Clock | |
Your System | ||
|
GB
You can view the various functions available on your system.
1 Press the Demo button.
Result: The various functions available are listed in turn on the dis- play.
All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections.
Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:
When you first purchase the
After a power failure
After unplugging the unit
Remember to reset the clock when the time changes from regular to daylight savings and vice verse.
For each step, you have a few seconds to set the required
2 To cancel this function, press Demo again.
options. If you exceed this time, you must start again.
1 | Switch the system on by pressing On/Standby. | |
2 | Press Timer/Clock twice. |
|
| Result: CLOCK is displayed. |
|
3 | Press Enter. |
|
| Result: The hour flashes. |
|
4 |
|
|
To... | Turn the Multi Jog knob to the... | |
| Increase the hours | Right |
| Decrease the hours | Left |
5 | When the correct hour is displayed, press Enter. | |
| Result: The minutes flash. |
|
6 |
|
|
To... | Turn the Multi Jog knob to the... | |
If the temperature of the set is too higher, the Volume will be adjust till VOL. 20 automatically.
| Increase the minutes | Right |
| Decrease the minutes | Left |
7 | When the correct time is displayed, press Enter. | |
| Result: The clock starts and is displayed, even when the system is in | |
standby mode.
You can display the time, even when you are using another func- tion, by pressing Timer/Clock once.
1 
2
4,6
3,5,7
12