Connecting the FM Aerial

There are two types of aerial, (depending on option chosen).

GB

How to connect a SCREW TYPE aerial.

The FM aerial connector terminals are located on the rear of the system and marked FM (75Ω ).

Spread the T.form FM aerial out and attach the ends to a wall, in the position providing the best reception.

How to connect a COAXIAL TYPE aerial.

Connect a 75Ω antenna to the FM antenna terminal.

Plug the connector on the FM aerial supplied into the coaxial socket (75Ω ) marked FM on the rear of the system.

Follow the instructions given on Page 32 to tune into a radio station, and determine the best position for the aerial.

If reception is poor, you may need to install an outdoor aerial.

To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).

Connecting the SW Aerial (option)

How to connect a WIRE TYPE aerial.

Spread the SW aerial out and attach the ends to a wall, in the position providing the best reception.

If reception is poor (e.g. distance from transmitter too great, walls blocking the radio waves, etc.), install an outdoor aerial.

11