Connection for better sound
GB
Connecting to an amplifier with Dolby Pro Logic support.
DVD/CD Digital Out Jack
This unit can output DVD/CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment. (DAT deck, MD recorder, etc.). Remove the dust cap (1) from the DVD/CD DIGITAL OUT jack. Then, connect an optical cable plug to the DVD/CD DIGITAL OUT jack.
When the DVD/CD DIGITAL OUT jack is not being used Attach the supplied dust cap.
DIGITAL OUT
While playing a DTS disc, no sound is reproduced. In this case, connect to an external amplifier.
Insert Remote Batteries
OPTICAL INPUT |
1 Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow.
2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and
3 Replace the battery cover.
Follow these precautions to avoid leaking or cracking cells:
•Place batteries in the remote control so they match the polarity:(+) to (+)and
CAUTION • Use the correct type of batteries.Batteries that look similar may differ in voltage.
•Always replace both batteries at the same time.
•Do not expose batteries to heat or flame.
9
