Samsung MAXVL45FH/UMG Programming the Order of Playback, Checking or Changing Programmed, Tracks, You can decide:, To, PRGM, VCD/CD, Program, Program, Program, Program, Program

Programming the Order of Playback

You can decide:

The order in which you listen to the tracks on the discs loaded

Which tracks you do not wish to listen to

A maximum of up to 30 order of tracks desired to listen may be programmed.

Before selecting the track, the VCD player should be stopped.

This function may be used simultaneously with the CD Repeat function.

1	If the CD function is selected, stop the player by pressing				.
2	Load the selected CDs.
3	Press Program.
	Result: The following indications are displayed:
	(01 = Programme No, DI = Disc No, – – = Track No on the disc)
4	If necessary, select the disc containing the required track by pressing
	the corresponding Disc (1, 2, 3) button.
5	Select the required track by turning the Multi Jog knob:
	To the left to move back through the tracks
	To the right to move forward through the tracks
6	Press Program to confirm your selection.
	Result: The selection is stored and			is displayed.
7	To select other tracks, repeat Steps 4 to 6.
8	Press VCD/CD (	) to listen to the track selection in the order pro-
	grammed.
9
	To...			Turn the Multi Jog knob		...
	Listen to the current track again			One notch to the left
	Listen to the previous track			Two notches to the left
	Listen to the next track			One notch to the right
	Skip forwards or backwards one			The appropriate number of
	or more tracks			notches to the right or to the		left
10	To cancel the selection, press		.
	Once if the compact disc player is stopped
	Result: PRGM is no longer displayed.

If you open the compartment, the selection is cancelled.

If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track.

You can also use the / buttons to select the required tracks in step 5, 9.

8

5,9 5,9

1,10

5,9

3,6

4

Checking or Changing Programmed

Tracks

GB

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.
2	Press Program.
	Result: The following indications are displayed:

(C = Check, 01=Program No, DI = Disc No, – – – = Track No on the disc)

If you have already programmed 30 tracks, C is displayed instead of P when you press Program.

3	Press Program again.
	Result: The first track selected is displayed, together with the letter C (Change).
4	Press Program one or more times until the track to be changed is displayed.
5	If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6	Press	and	or turn Multi Jog to select a different track.
7	Press Program to confirm your change.
8	Press VCD/CD (		) to start listening to the selection.
	Result: The first track selected is played.

When selecting the tracks of numbers larger than 3 digit figures (figures from the number 100), please use the Digit buttons.

8

1

6 6

		2,3,4,7
6						5
					Mute	Disc Skip
1	2		3	CD Repeat		Return
4	5		6		Time	Disc
					Search	View
7	8		9		Sound	Slow
Band	+10/0	Mono/ST.			Key Control
					b	#
			Zoom
Timer		AI Sleep	Counter		Deck 1/2
On/Off				Reset
		TAPE
1		VCD / CD				8
		Volume				6
6
PREV		Tuning			NEXT
		Mode
		Volume

15