Programming the Order of Playback

The order of the track desired to listen

The track not desired to listen

A maximum of up to 30 order of tracks desired to listen may be programmed.

Before selecting the track, the CD player should be stopped.

This function may be used simultaneously with the CD Repeat function.

1	If the CD function is selected, stop the player by pressing	.


2	Load the selected CDs.
3	Press PROGRAM.
	Result: The following indications are displayed:

(01 = Program no., DI = Disc no., – – – – = Track no. on the disc)

4	If necessary, select the disc containing the required track by pressing
	the corresponding DISC (1, 2, 3) button.
5	Select the required track by turning the MULTI JOG knob:
	To the left to move back through the tracks
	To the right to move forward through the tracks
6	Press PROGRAM to confirm your selection.
	Result: The selection is stored and		is displayed.
7	To select other tracks, repeat Steps 4 to 6.
8	Press VCD/CD (	) to listen to the track selection in the order programmed.


9
9	To...		Turn the MULTI JOG knob...
	Listen to the current track again		One notch to the left
	Listen to the previous track		Two notches to the left
	Listen to the next track		One notch to the right
	Skip forwards or backwards one		The appropriate number of
	or more tracks		notches to the right or to the left

10 To cancel the selection, press .

Once if the compact disc player is stopped Result: PRGM is no longer displayed.

If you open the compartment, the selection is cancelled.

If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track.

You can also use the / buttons to select the required tracks in step 5, 9.

5,9

1,10

3,6

Checking or Changing Programmed Tracks

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.


2	Press PROGRAM.
	Result: The following indications are displayed:

(C = Check, 01=Program No, DI = Disc No, – – – – = Track No on the disc)

If you have already programmed 30 tracks, C is displayed instead of P when you press PROGRAM.

3	Press PROGRAM again.
	Result: The first track selected is displayed, together with the letter C (Change).
4	Press PROGRAM one or more times until the track to be changed is dis-
	played.
5	If necessary, press the corresponding DISC (1, 2, 3) button to change discs.
6	Press	and	or turn MULTI JOG to select a different track.


7	Press PROGRAM to confirm your change.
8	Press VCD/CD (		) to start listening to the selection.


	Result: The first track selected is played.

When selecting the tracks of numbers larger than 3 digit figures (figures from the number 100), please use the Digit buttons.

6 6