Samsung MAXVS950TH/ESN manual Microphone Function, Connecting Headphones, Maxx Bass Level Function

Setting the System to Switch off Automatically

GB

While listening to a compact disc or a cassette, you can set the system to switch off automatically

Example: You wish to go to sleep to music.

1 Press AI SLEEP.

Result: playback starts and the following indications are displayed:

90 MIN

2 Press AI SLEEP one or more times to indicate how long the system should continue playing before it switches off:

At any time, you can:

	Check the remaining time by pressing AI SLEEP
	Change the remaining time by repeating Steps 1 and 2
3	Press AI SLEEP one or more times until AI SLEEP is displayed.
	Result: The system will automatically switch off at the end of the disc
	or cassette.
4	To cancel SLEEP function, press AI SLEEP one or more times until
	OFF is display.

/

MAXX BASS Level Function

(MAX-VS940/VS990)

MAXX BASS utilizes the principle of the missing fundamental ,which creates the sensation of low frequencies by generating a carefully calculated series of harmonics designed to simu- late the auditory experience caused by the missing fundamen- tal pitch. These harmonics extend the virtual frequency

response up to two-third or 11/2 octaves below the physical speaker cutoff frequency without perceived distortion or increased power consumption.MAXX BASS function stresses low tones providing thudding sound effects.

1 press MAXX BASS button on the front panel to select:

➞“M-BASS 1➞ M-BASS 2 ➞ M-BASS 3 ➞ M-BASS 4 ➞ OFF”.

2 You can select the level of low tones you desire.

24

S.BASS Level Function

(MAX-VS950)

Super BASS function stresses low tones providing thudding sound effects.

1 press S.BASS button on the front panel to select:

➞“S-BASS 1➞ S-BASS 2 ➞ S-BASS 3 ➞ S-BASS 4 ➞ OFF”.

2 You can select the level of low tones you desire.

Microphone Function

The microphone enables the user to mix in his or her vocals to sing-along with the music.

Preparation

Plug the microphone with a 6.3ø mic jack into microphone terminal.

1	Turn the MIC LEVEL knob to adjust the MIC1, MIC2 volume.
2	Press ECHO button to select ECHO1,ECHO2,ECHO OFF.

The POWER SURROUND function is not available if plugging the Microphone into MIC jacks.

/

2

1

Connecting Headphones

You can connect a set of headphones to your mini-compact system so that you can listen to music or radio programmers without disturbing other people in the room. The headphones must have a 3.5ø jack or an appropriate adapter.

Connect the headphones to the PHONES jack on the front panel. Result: The loudspeakers are no longer used to output the sound.

Prolonged use of headphones at a high volume may damage your hearing.