Viewing the Various Functions on | Setting the Clock | |
Your System | ||
|
GB
You can view the various functions available on your system.
1 Press the Demo button.
Result: The various functions available are listed in turn on the dis- play.
All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections.
2 To cancel this function, press Demo again.
Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:
When you purchase the
After a power failure
After unplugging the unit
Remember to reset the time when the clock changes from winter to summer time and vice verse.
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1 |
2 |
3 |
4 |
5 |
6 |
7 |
Switch the system on by pressing On/Standby.
Press Timer/Clock twice.
Result: CLOCK is displayed.
Press Enter.
Result: The hour flashes.
To... | Turn the Multi Jog knob to the... |
Increase the hours | Right |
Decrease the hours | Left |
When the correct hour is displayed, press Enter. | |
Result: The minutes flash. |
|
|
|
To... | Turn the Multi Jog knob to the... |
Increase the minutes | Right |
Decrease the minutes | Left |
When the correct time is displayed, press Enter.
Result: The clock starts and is displayed, even when the system is in standby mode.
You can display the time, even when you are using another function, by pressing Timer/Clock once.
You can also use Program/Set button on the remote control to instead Enter button in step 3, 5, 7.
You can also use 
/ 
buttons to instead Multi Jog knob in step 4, 6.
1 | 4,6 | 4,6 |
| 3,5,7 | |
|
| |
|
| 4,6 |
| 2 |
|
10
