Samsung MAXZS730RH/SPX manual Setting the Clock

Demo/Dimmer function Setting the Clock

GB

All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off".

1	Press the Demo/Dimmer button.
	Result: All functions available on the system appear on the front
		panel display.
	Each of these are explained in detail in this guide. Please refer to
	the relevant section.
2	Press the Demo/Dimmer button again.
	Result: The Dimmer function is selected and the display darkens.
	Press the Demo/Dimmer button once again to brighten the front
	panel display.
3	A display brightness control can only be performed while the
	system power is on.

Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:

When you first purchase the mini-compact system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1 Switch the system on by pressing Standby/On.

2 Press Timer/Clock twice. Result: CLOCK is displayed.

3 Press Enter.

Result: The hour flashes.

4	To...	Turn the Multi Jog knob to the...
	Increase the hours	Right
	Decrease the hours	Left
5	When the correct hour is displayed, press Enter.
	Result: The minutes flash.
6
	To...	Turn the Multi Jog knob to the...
	Increase the minutes	Right
	Decrease the minutes	Left
7	When the correct time is displayed, press Enter.
	Result: The clock starts and is displayed, even when the system is in

standby mode.

You can display the time, even when you are using another function, by pressing Timer/Clock once.

You can also use Program/Set button on the remote control to instead Enter button in step 3, 5, 7.

You can also use / buttons to instead Multi Jog knob in step 4, 6.

2

1

3,5,7

4,6