1-3. Connecting the Power Cord
: Primary Monitor
1.Connect the primary monitor and the rest of the installed monitors using power cap cords.
2.Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the 220V or 110V wall outlet.
(The input voltage is switched automatically.)
3.POWER S/W : Turns the product on and off.
• When the product is connected to a PC, you can turn the product on and use it.
•If DP (<DP>) cables are used for the connection, select the input signal <DP> by pressing SELECT ALL and [ 
SOURCE] on the multi control pad.
•The power cord can be connected to any of the provided monitors, as required. However, we recommend the connections suggested above.
Installing the Product |
