2012.10 (Rev 1.0.)
5
Limitations
1. This software supports only the Windows operating systems listed above.
2. Only the Samsung SSDs listed above are supported by this software. OEM
storage devices provided through a computer manufacturer or supplied
through another channel are not supported.
3. This software will run only if the operating system is installed on the source
disk. It will not function on disks that lack an operating system installation.
4. If the amount of data stored on the source disk exceeds the capacity of the
target disk, cloning will not proceed. The source disk (e.g. “C:” drive) must
consist of at least 20% free space. If more than 80% of the source disk is
filled with data, the cloning process cannot proceed normally. Secondary
partitions require at least 5 GB of free space.
5. On systems with three (3) drives or more (e.g. “C:”, “D:”, and “E:” drives) with
the operating system installed on the “C:” drive, only the first two
consecutive drives will be cloned (“C:” and “D:” drives). The “System” partition
that is created during Windows installation is automatically replicated.
6. OEM recovery partitions, generated at the factory by computer
manufacturers, cannot be replicated.
7. A difference of a few GB of data capacity between the source and targ et
disks is normal after cloning. The software does not copy the files Windows
automatically generates to manage virtual memory (page file, hibernation file,
etc.).
8. This software cannot clone encrypted disks. In order to clone an encrypted
disk, you must first remove the password from the disk.
9. If you have instant PC recovery software installed on your system, this
software may not function properly.