Samsung MH17FSSSU/XSG manual Screen is blank and is, No sound, Sound is too high pitched or too

Picture rolls vertically.

"Check Signal Cable" message

Image is not clear. Picture is blurred.

"Not Supported Mode" message

Picture image is unstable and vibrates.

GhostPictureimagesrolls verticallyare shown. in the picture.

The image is too light or too dark

Image is not clear. Picture is blurred.

Screen color is inconsistent.

Color image is distorted with Picture image is unstable and dark shadows.

vibrates.

White color is poor.

Ghost images are shown in the picture.

Power Indicator blinks green.

The image is too light or too dark

Screen is blank and power indicator light is steady green or Screen color is inconsistent. blinks every 0.5 or 1 seconds

zCheck(Refer toif thesignalConnectingcable isthesecurelyMonitorconnected) . Connect it again securely.

(Refer to Connecting to a Computer)

zEnsure that the signal cable is firmly connected to the PC or video sources.

zRun(ReferFrequencyto the ConnectingCoarse andtheFineMonitortuning) .

zTurnEnsureonthatagaintheafterPC removingor video sourcesall accessoriesare turned on. (video extension cable, etc.)

zSet resolution and frequency to the recommended ranges.

zCheck the maximum resolution and the frequency of the video adaptor.

zCheckompareif thetheseresolutionvalues andwithfrequencythe data insettheforPresetthe computerTiming videoModescardChartfalls. in the range supported by the monitor.

the monitor menu and Preset Timing Modes.

zCheck if the signal cable is securely connected. Connect it again securely.

(Refer to Connecting to a Computer)

zAdjust the Brightness and Contrast.

z(ReferRun Frequencyto the BrightnessCoarse ,andContrastFine tuning) .

zTurn on again after removing all accessories (video extension cable, etc.)

zAdjust color using Custom under OSD Color Adjustment

zSet resolution and frequency to the recommended ranges. menu.

zCheck if the resolution and frequency set for the computer video card falls in the range supported by the monitor.

If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes.

zThe monitor is currently saving the changes made in settings to the OSD memory.

zAdjust the Brightness and Contrast. (Refer to the Brightness, Contrast)

zThe monitor is using its power management system.

z

z Adjust color using Custom under OSD Color Adjustment menu.

Color image is distorted with The screen is blank and is dark shadows.

blinking.

White color is poor.

Power Indicator blinks green.

. Problems related to Audio

Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds

zIf you see the "TEST GOOD" message on the screen when you press the MENU button, check the cable connection between the monitor and the computer to ensure that the connector is properly connected.

zThe monitor is currently saving the changes made in settings to the OSD memory.

zThe monitor is using its power management system.

zPress a key on the keyboard

Problems			Solutions
The screen is blank and is	z	If you see the "TEST GOOD" message on the screen when
blinking.	z	you press the MENU button, check the cable connection
No sound		Ensure that the audio cable is firmly connected to both the
		between the	and the computer to ensure that the
		audio-in port monitoryour monitor and the audio-out port on your

	connector is properly connected.
	sound card.
	z Check the volume level.
3. Problems related to Audio	(Refer to the Volume)

Problems related to audio signals and their solutions are listed below.

Sound level is too low.z Check the volume level. (Refer to the Volume)

	z If the volume is still too low after turning the control to its
Problems		maximum, check the volume control on the computer sound
		Solutions
		card or software program.
No sound	z Ensure that the audio cable is firmly connected to both the
Sound is too high pitched or too	z	Adjust the Treble and Bass to appropriate level.
low pitched		audio-in port on your monitor and the audio-out port on your
		sound card.
		(Refer to the Connecting the Monitor)
	z Check the volume level.
. Problems related to Remote Control		(Refer to the Volume)
Sound level is too low.	z Check the volume level.
		(Refer to the Volume)
	z If the volume is still too low after turning the control to its
Problems		maximum, check the volume control on the computer sound
		Items to check
		card or software program.
The remote control buttons do	z Check the battery polarities (+/-).
Sound is too high pitched or too	zz	Adjust the Treble and Bass to appropriate level.
not respond.		Check if the batteries have been exhausted.
low pitched