Samsung MM-DA25R/XEE manual Setting the Clock, What is Progressive or Non-Interlaced Scanning?

P.SCAN(Progressive Scan) Function

Unlikeregular Interlace Scan, in which two fields of picture information alternate to create the entire picture(odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

Press and hold P.SCAN button on the remote control for over 5 seconds in stop mode.

•Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" alternately.

Setting the Clock

	For each step, you have a few seconds to set the required options.
	If you exceed this time, you must start again.			CONNECTIONS
1	POWER button.	2 twice.	3 The hour flashes.
Switch the system		Press TIMER/CLOCK	Press ENTER.
on by pressing
		• CLOCK is displayed.	• Increase the hours :
			• Decrease the hours :

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

When the correct

4 hour is displayed, press ENTER. The minutes flash.

•Increase the minutes :

•Decrease the minutes :

5	When the correct
	time is displayed,
	press ENTER.

•"TIMER" appears in the display.

•The current time is now set.

Note

•You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

In interlaced-scan video, a frame consists of two	The progressive scanning method scans one full frame of
interlaced fields (odd and even), where each field	video consecutively down the screen, line by line.
contains every other horizontal line in the frame.	An entire image is drawn at one time, as opposed to the
The odd field of alternating lines is displayed first, and	interlaced scanning process by which a video image is
then the even field is displayed to fill in the alternating	drawn in a series of passes.
gaps left by the odd field to form a single frame. One	The progressive scanning method is desirable for dealing
frame, displayed every 1/25th of a second, contains two	with moving objects.
interfaced fields, thus a total of 50 fields are displayed
every 1/50th of a second.
The interlaced scanning method is intended for capturing
a still object.

Note	• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
	Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
	scan TVs.)

•Depending on the capabilities of your TV, this function may not work.

Checking the Remaining Time

Press the REMAIN button.

•For checking the total and remaining time of a title or chapter being played.

Each time the REMAIN button is pressed

	TITLE ELAPSED		TRACK ELAPSED
	TITLE REMAIN		TRACK REMAIN
DVD		CD
	CHAPTER ELAPSED		TOTAL ELAPSED
	CHAPTER REMAIN		TOTAL REMAIN

13 14