Repeating One or All Tracks on the Compact Discs
You can repeat playing CD indefinitely.
●●CD containing a specific track.
●●Whole tracks of a selected CD.
1.Press REPEAT button.
Each time you press the REPEAT button, the repeat mode will change as following:
MP3 : R OFF ;R TRK ; R DIR ; R DISC; R RAN .
CD : R OFF ;R TRK ; R DISC ; R
CD : R OFF ;R TRK ; R ALL ; R
•Depending on your product,the repeat mode display maybe different.
2.When you wish to stop the Repeat function, press REPEAT until "R OFF" is displayed.
•R OFF : Cancels Repeat Playback.
•R TRK : Repeatedly plays the selected track.
•R DIR : Repeatedly plays all tracks in the selected folder.
•R DISC : Repeatedly plays the entire disc
•R ALL : Repeatedly plays the all tracks in the disc.
•R RAN : Plays tracks in random order.
Searching for a Specific Music Passage on a CD
When listening to a compact disc, you can quickly search for a specific music passage on a track.
To search for | Press |
-Fowards ............... ) button
-Backwards ............ ( button
Press and hold the [/] button on the top panel to automatically scan for a track.
10 Skip Track
Press the +10 button while in playback mode.
This will skip the tracks as many as 10 from the current track.
8English
CD Programming
(This function is not available during playback of an
●●You can program the playback order of up to 24 tracks of your choice.
●●However, you must stop playing the CD before selecting tracks.
1.While in CD playback mode, press STOP(@) to stop playing the CD.
2.Press the ENTER button to display the message below:
(01= program number,
3.Use [ or ] to move to a desired track.
•Press [ to move to the previous track.
•Press ] to move to the next track.
4.Press the ENTER button to confirm your
selection,the selection is stored and displayed.
5.To select a different track, following the steps 3 to 4 above.
6.Press PLAY (p) to play the programmed tracks.
7.Press STOP (@) to stop playing the programmed tracks, Press STOP (@) again to cancel playing the programmed tracks.
•If you open the disc tray or turn off the product, your programming will be canceled.
Check and Edit the Programmed Tracks
You can check a list of programmed tracks and edit them as you want.
1.If a programmed track is being played, press STOP (@) once.
2.Press ENTER twice to display the message below:
(C=Check, 01= program number)
If a total of 24 tracks are already programmed, “C”
will be displayed rather than “P” in the display.
3.Repeat pressing ENTER until the desired track is displayed.
4.Press [ or ] to select a different track.
5.Press ENTER to confirm your selection.
6.To play the programmed tracks, press PLAY (p).
