Listening to Radio
You can listen to the chosen band (FM, MW, LW broadcast stations) by using either the automatic or manual tuning operation.
Presetting Stations
You can store up to:
15 | FM stations | • FM | Frequency Modulation |
8 MW stations | • AM(MW) | Medium Wave | |
7 | LW stations | • LW | Long Wave |
Remote Control Unit
1 Press TUNER/
BAND button.
•The selection toggles back and forth between "FM ➝ MW ➝ LW" each time the TUNER(BAND) button is pressed.
2 Tune in to the desired station.
Automatic Tuning 1 | Press the STOP ( |
| ) button |
| |||
| to select PRESET and then | ||
| |||
press 
button to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button to
select "AUTO" and then press 
button to automatically search the band.
Manual Tuning Press the STOP ( 
) button to select "MANUAL",Briefly press
to increase or decrease the frequency incrementally.
Example: Presetting FM 89.1 in the memory
Press the |
|
|
|
TUNER(BAND) | Press | to | Press the TUNER |
1button and select | 2 select "89.10". | 3 MEMORY button. | |
• Each time the button is pressed, | • Refer to Step 2 on page 41 to | • “PROG” flashes in the | |
the band switches between | automatically or manually tune in | display. | |
"FM ➝ MW ➝ LW". | to a station. |
|
|
kHz |
| kHz | kHz |
MHz |
| MHz | MHz |
Main Unit
Press the Function
1 button to select the desired band (FM, MW, LW).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
)
button to select
PRESET and then press 
button to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button
to select "AUTO" and then
press and hold 
button to automatically search the band.
Manual Tuning Press STOP (
) to select MANUAL and then briefly
press 
to tune in to a lower or higher frequency.
4 Press 
to select preset number.
•You can select between 1 and 15.
kHz 
MHz
5 | Press the TUNER | 6 |
| To preset another |
| station, repeat | |||
MEMORY button. |
| |||
| steps 2 to 5. | |||
|
|
|
|
|
•Press the TUNER MEMORY button before ‘PROG’ disappears from the display.
•‘PROG’ disappears from the display and the station is stored in memory.
kHz 
MHz
OPERATION RADIO
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)41 | • | Each time the button is pressed, the sound switches between "STEREO" and "MONO". | |
• | In a poor reception area, select MONO for a clear, | ||
|
To tune in to a preset station, press 
on the remote control to select a channel.
42