DEMO Function
GB
You can view the various functions available on your system.DIMMER Function
You can adjust the brightness of the VFD display depending on the surrounding lighting conditions.
1 Press the DEMO/DIMMER button.
Your selection switches each time the button is pressed:
10
Setting the Clock
Your system is equipped with a clock which allows you to turn your system on and off automatically.
You should set the clock:
When you first purchase the micro component system
After a power failure 
After unplugging the unit
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1 | Switch the system on by pressing ( |
| ) . |
| |||
| |||
2 | Press the TIMER/CLOCK button twice. |
|
|
| Result: CLOCK is displayed. |
|
|
3 | Press the PROGRAM/SET button. |
|
|
| Result: The hour flashes. |
|
|
4 |
|
|
|
| To... |
| Press... | |
| Increase the hours |
|
|
| Decrease the hours |
|
|
5 | When the correct hour is displayed, press the PROGRAM/SET button. | ||
| Result: The minutes flash. |
|
|
6 |
|
|
|
To... |
| Press... | |
| Increase the minutes |
|
|
| Decrease the minutes |
|
|
7 | When the correct time is displayed, press the PROGRAM/SET | ||
button.
Result: 
"TIMER SET" appears in the display.
The current time is now set.
You can display the time, even when you are using another function, by pressing this TIMER/CLOCK button once.
You can use 
/ 
buttons on the front panel to instead of 
/ 
buttons on the remote control.
1
3,5,7
4,6
4,6
2