Samsung MMZS8QH/XFO Selecting a Stored Station, Improving Radio Reception, To listen to Press

Searching for and Storing the Radio Stations

You can store up to:

15 FM stations

8 MW stations

7 LW stations

1	Switch the system on by pressing (			).
2	Select the required frequency band by pressing TUNER/BAND
	again on the front panel or BAND on the remote control.
	Result: The appropriate indication is displayed:
	FM		Frequency Modulation
	AM(MW)		Medium Wave
	LW		Long Wave
3
	To search for a	Press TUNING MODE
	station...
	Manually	One or more times until MANUAL
		is displayed.
	Automatically	One or more times until AUTO is
		displayed.
	PRESET function is explained in detail in the section
	“Selecting a Stored Station” on.
4	Select the station to be stored by:

Pressing or buttons on the front panel or or buttons on the remote control to increase or decrease the frequency respectively.

To scroll through the frequencies faster when

searching manually, hold down the or buttons.

The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode.

5 If you do not want to store the radio station found, revert to Step 4 and search for another station.

Otherwise:

aPress PROGRAM/SET.

Result: The PROG is displayed for a few seconds.

bPressing or buttons on the front panel or or buttons on the remote control to assign a program number between 1 and 15.

cPress PROGRAM/SET to store the radio station.

Result: PROG is no longer displayed and the station is stored.

6 To store any other radio frequencies required, repeat Steps 3 to 5.

The PROGRAM function can be used to assign a new station to an existing program number.

2
3		4 5
4 5
TUNER	TIMER/CLOCK	TIMER ON/OFF
BAND	2
AUX	PROGRAM/SET	REP. A B
5		MO/ST
SLEEP	EQ/S.BASS	SRS WOW
CD SYNC.	DISPLAY RDS PTY

CD

	TUNING/	5VOLUME
3	ALBUM4
TUNING		REPEAT
MODE
+10	4 5

Selecting a Stored Station

GB

You can listen to a stored radio station as follows:

1		Switch the system on by pressing (				) .
2		Select the required frequency band by pressing TUNER/BAND on
		the front panel.
3		Select the radio station as follows.
	To listen to ...		Press ...
		Stored station	1. the TUNING MODE button until
				“PRESET” is displayed.
			2.		or		button to select the
				required program.

1

2
3	3
3

Improving Radio Reception

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

If reception from a specific FM radio station is poor, press MO/ST. to switch from stereo mode to mono. The quality of the sound will be improved.

		MUTE
TUNER	TIMER/CLOCK	TIMER ON/OFF
BAND
AUX	PROGRAM/SET	REP. A B
		MO/ST
SLEEP	EQ/S.BASS	SRS
CD SYNC.	DISPLAY RDS PTY

CD

15