Ventilating Your Room
If the air in your room is stale, you can air the room using the Fan feature.
1 If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( 
).
Result: ◆ The air inside the room circulates and stale air is discharged outside.
Otherwise, push the ventilation lever to the left and closed position ( 
).
Result: ◆ The air simply circulates inside the room.
Remote Control | Control Panel |
2If necessary, press the 
(On/Off) button.
Result: ◆ The air conditioner starts up in the mode selected when the unit was last used.
◆The unit beeps twice.
3 If the FAN indicator is not lit on the unit:
◆ Press the FAN button on the remote control or
◆ Press the Mode button on the unit one or more times until the FAN indicator lights up
Result: ◆ The unit beeps each time you press the FAN/Mode button. ◆ The air conditioner starts up in Fan mode.
➢◆ You can change modes at any time.
◆When the air conditioner is in the Fan mode, the temperature cannot be set or displayed.
◆You cannot use Fan mode in the energy saving mode
4 To set the fan speed:
◆Press the HIGH, MED or LOW button on the remote control as desired.
or
◆Press the Fan Speed button on the unit one or more times until the
desired Fan speed indicator lights up.
5To control the direction of the air flow, refer to page 10.
