Appendix

Troubleshooting Guide

Before you call a repair person for your oven, check this list of possible problems and solutions.

Neither the oven’s display nor the oven operate.

Properly insert the plug into a grounded outlet.

If the outlet is controlled by a wall switch, make sure the wall switch is turned on.

Remove the plug from the outlet, wait ten seconds, then plug it in again.

Reset the circuit breaker or replace any blown fuse.

Plug another appliance into the outlet; if the other appliance doesn’t work, have a qualified electrician repair the outlet.

Plug the oven into a different outlet.

The oven’s display works, but the power won’t come on.

Make sure the door is closed securely.

Check to see if packing material or other material is stuck to the door seal.

Check for door damage.

Press Cancel twice and re-enter all cooking instructions.

The power goes off before the set time has elapsed.

If there has not been a power outage, remove the plug from the outlet, wait ten seconds, then plug it in again. If there was a power

outage, the time indicator will display “

” Reset the clock and

any cooking instructions.

 

Reset the circuit breaker or replace any blown fuse.

The food is cooking too slowly.

Make sure the oven is on its own 20 amp circuit line. Operating another appliance on the same circuit can cause a voltage drop. If necessary, move the oven to its own circuit.

You see sparks or arcing.

Remove any metallic utensils, cookware, or metal ties. If using foil, use only narrow strips and allow at least one inch between the foil and interior oven walls.

The turntable makes noises or sticks.

Clean the turntable, roller ring and oven floor.

Make sure the turntable and roller ring are positioned correctly.

Using your microwave causes TV or radio interference.

This is similar to the interference caused by other small appliances, such as hair dryers. Move your microwave further away from other appliances, like your TV or radio.

Note :

If the oven is set more than 25 minutes at 80, 90 or 100 percent power level, after the first 25 minutes the power level will automatically adjust itself to 70 percent power to avoid overcooking.

Care and Cleaning

Follow these instructions to clean and care for your oven.

Keep the inside of the oven clean. Food particles and spilled liquids can stick to the oven walls, causing the oven to work less efficiently.

Wipe up spills immediately. Use a damp cloth and mild soap. Do not use harsh detergents or abrasives.

To help loosen baked on food particles or liquids, heat two cups of water (add the juice of one lemon if you desire to keep the oven fresh) in a four-cup measuring glass at High power for five minutes or until boiling. Let stand in the oven for one or two minutes.

Remove the glass tray from the oven when cleaning the oven or tray. To prevent the tray from breaking, handle it carefully and do not put it in water immediately after cooking. Wash the tray carefully in warm sudsy water or in the dishwasher.

Clean the outside surface of the oven with soap and a damp cloth. Dry with a soft cloth. To prevent damage to the operating parts of the oven, don’t let water seep into the openings.

Wash the door window with very mild soap and water. Be sure to use a soft cloth to avoid scratching.

If steam accumulates inside or outside the oven door, wipe with a soft cloth. Steam can accumulate when operating the oven in high humidity and in no way indicates microwave leakage.

Never operate the oven without food in it; this can damage the magnetron tube or glass tray. You may wish to leave a cup of water in the oven when it is not in use to prevent damage if the oven is accidentally turned on.

If you have a problem you cannot solve,

please call our service line:

1-800-SAMSUNG (1-800-726-7864)

22

Page 22
Image 22
Samsung MR1032CBC, MR1031CWC, MR1033CSC manual Appendix, Troubleshooting Guide, Care and Cleaning

MR1033CSC, MR1031CWC, MR1032CBC specifications

The Samsung MR1032CBC, MR1031CWC, and MR1033CSC are cutting-edge microcontrollers that focus on enhancing functionality, performance, and energy efficiency in embedded systems and IoT applications. These microcontrollers are part of Samsung’s advanced product lineup, offering a range of features that cater to various industrial and consumer electronics needs.

The MR1032CBC model is optimized for real-time applications, boasting a high-performance ARM Cortex-M4 core that operates at speeds of up to 120 MHz. It includes an extensive set of peripherals such as ADCs, timers, and communication interfaces that make it highly suitable for applications in automation, robotics, and smart devices. Its low power consumption is a significant advantage, allowing for extended battery life in portable applications.

Meanwhile, the MR1031CWC focuses on wireless connectivity features. This microcontroller supports Bluetooth and Wi-Fi, enabling seamless integration into IoT ecosystems. It is engineered with security protocols to ensure safe data transmission, making it ideal for smart home devices and wearables. The MR1031CWC also features ample Flash and RAM memory, providing flexibility for complex application development without sacrificing performance.

The MR1033CSC, on the other hand, emphasizes data processing and multimedia capabilities. It comes equipped with enhanced graphical support, making it suitable for applications in consumer electronics like smart TVs and digital signage. It supports various audio and video codecs, allowing developers to create feature-rich applications that demand significant processing power while still maintaining energy efficiency.

All three models are built on Samsung's reliable technology platform, which includes robust development tools and support for multiple programming environments. The microcontrollers can operate in a wide range of temperatures and offer robust protection features against over-voltage and thermal challenges, ensuring reliability in diverse and demanding environments.

Overall, the Samsung MR1032CBC, MR1031CWC, and MR1033CSC microcontrollers represent the latest advancements in embedded systems technology, providing developers with powerful options to create innovative applications in various sectors. Their unique features cater to an array of functionalities, from real-time processing and wireless communication to multimedia processing, making them versatile choices for modern technology solutions.