Limitations
1.This software only supports the Windows operating systems listed in the User Manual.
2.This software only supports the Samsung SSDs listed in the User Manual.
OEM storage devices provided through a computer manufacturer or supplied through another channel are not supported.
3.This software will run only if the operating system is installed on the Source Disk. It will not function on disks that lack an operating system installation.
4.On systems with two (2) drives or more (e.g. “C:”, “D:”, and “E:” drives) with the operating system installed on the “C:” drive, only the first two drives will be cloned. The “System” partition that is created during Windows installation is automatically replicated.
5.The OEM Recovery partition created by the computer manufacturer as a factory setting will not be cloned. However, it will be automatically cloned if the manufacturer is Samsung and SRS (Samsung Recovery Solution) 5, SRS 6, or SRS 7 is installed. (Versions lower than SRS 5 are not supported.)
6.A difference of a few GB of data capacity between the Source and Target Disks is normal after cloning. The software does not copy the files Windows automatically generates to manage virtual memory (page files and hibernation files).
7.This software cannot clone encrypted disks. In order to clone an encrypted disk, you must first remove the password from the disk.
8.If the mainboard chipset drivers are not up to date when cloning, this software may not function properly.
9.If there are multiple operating systems installed on the PC (e.g. Windows 7 is installed on the C drive and Windows 8 is installed on the D drive), the cloned disk may not function properly.
10.If the Source Disk is damaged (e.g. the disk has bad sectors), the cloned disk may not function properly.
11.When attempting to clone a disk using this software, it is recommended that you close all other programs and free up sufficient memory before cloning.
12.If you have instant PC recovery software installed on your system, this software may not function properly.
13.If a Source Disk is converted into a dynamic disk, the software may not function properly.
14.The files in the user's Library folder are listed by default on the screen for selecting files to exclude during cloning.
15.To exclude files that are not in the Library folder, you can search for them by scanning folders. Program Files, Windows files, and Recycle Bin files are not scanned.
5