<<

>>
Connecting to a Power Source
How to charge the rechargeable battery (SLB-37D)
Charging LED
Charging LED of the AC Adapter
Charging LED
Being Charged Red LED is on
Charging is complete Green LED is on
Charging error Red LED is off or blinking
Being discharged
(Using the AC adapter) Orange coloured LED is on
Before inserting any cables or AC adapter, check the directions and
do not insert by force. It may cause damage to the cable or camera.
If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery
is inserted correctly.
If you charge the battery with the camera power on, the battery can’t
charge fully. Turn the camera off while charging the battery.
If you insert the fully discharged battery to charge it, do not turn on
the camera at the same time. The camera may not be turned on
because of the low battery capacity. Charge the battery for more than
0 minutes before using the camera.
Do not use the flash frequently or take a movie clip with a fully
discharged battery that has only been charged for a short time.