Samsung PN50A550S1F, PN50A550SF, PN58A550SF, PN58A550S1F Connecting a VCR, Connecting a S-Video

Connecting a VCR

TV Rear Panel TV Side Panel

VCR Rear Panel

Audio Cable	2	
(Not supplied)
Video Cable (Not supplied)
Antenna Cable (Not supplied)

1	Unplug the cable or antenna from
	the back of the TV.
	Connect the cable or antenna to
	the ANT IN terminal on the back of
	the VCR.
	Connect an Antenna Cable between
	the ANT OUT terminal on the VCR
2	and the ANT IN terminal on the TV.
	Connect a Video Cable between the
	VIDEO OUT jack on the VCR and
	the AV IN 1 [Y/VIDEO] or AV IN 2
3	[VIDEO] jack on the TV.
	Connect Audio Cables between the
	AUDIO OUT jacks on the VCR and
	the AV IN 1 (or AV IN 2) [R-AUDIO-
4	L] jacks on the TV.
	Press the SOURCE button on
	the remote control until you see

the VCR signal (see “Viewing an External Signal Source” on page 11).

➢If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

➢Each VCR has a different back panel configuration.

➢When connecting a VCR, match the color of the connection terminal to the cable.

➢When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connecting a S-Video

TV Rear Panel

VCR Rear Panel



S-Video Cable (Not supplied)

2

Audio Cable (Not supplied)

TV Side Panel	1	To begin, follow steps 1 in the
		previous section to connect the
		antenna or cable to your VCR and
	2	your TV.
		Connect an S-Video Cable between
		the S-VIDEO OUT jack on the VCR
		and the AV IN 2 [S-VIDEO] jack on
	3	the TV.
		Connect Audio Cables between the
		AUDIO OUT jacks on the VCR and
		the AV IN 2 [R-AUDIO-L] jacks on
	4	the TV.
		Press the SOURCE button on the
		remote control until you see the VCR
		signal (see “Viewing an External
		Signal Source” on page ).

➢An S-Video may be included with your VCR. (If not, check your local electronics store.)

➢Each VCR has a different back panel configuration.

➢When connecting a VCR, match the color of the connection terminal to the cable.

English - 5