Samsung PPM50H2 Connecting Speakers, Connecting a VCR/Cable Box

23

Connecting Speakers

22

Speaker Audio Cable

Connect the speaker audio cable to the external speaker output jack on the rear of the PDP

matching the “+” and “-” ends of the cable with the diagram on the PDP.

How to Connect

Fix the bracket onto the guide pole located on the rear

of speaker and fasten the screws.

After removing the three screes on the PDP, clamp the

speaker and the PDP together and fasten the screws.

Connecting PDP and Speakers / Stand and Speakers

Connecting a VCR/Cable Box

S-Video Cable

Audio Cable

Video Cable

Connect Video/S-Video cable between the Video/S-Video Output jack on the VCR/Cable

box and the Video Input jack on the PDP.

• For better video, you can use a S-Video cable.

•You can attach the Ferrite Cores(supplied) to the both jacks of the Video cable.

Simply set the Ferrite Cores right under the jacks.

Connect an Audio cable between the Audio Output jack on the VCR/Cable box and the

Audio Input jack (Video) on the PDP.

Videotape Playback:

1. Turn on PDP and press the Video or S-Video(if S-Video jack is connected.) button on your

remote control.

2. Turn on your VCR, insert a videotape and press the Play button.

• For an explanation of Component video, see your VCR/Cable Box owner’s instruction.

How to Connect

Power Plug

1

2

1

2

• Stand and speakers

<Separately sold: Stand>

Guide

pole

Guide

pole

Guide

pole

✱ The speakers MUST have more than 7watts rating (impedance 8ohm).

Contents

Main Important Safety Information Warning! Important Safety Instructions Thank You for Choosing Samsung 32 FCC Information Setup Connection (Connecting Speakers / Receiver) Picture Control Sound Contro Important Warranty Information Regarding Television Format Viewing User Instructions 6 Table of Contents Screen Image retention Page Front Panel Your New Plasma Display Panel Rear Panel Remote Control Buttons Remote Control 1 3 2 Wall Installation Instructions 1 2 3 4 14 Wall attachment panel 4 5 6 Separating the Display from the Wall Attachment Panel Displaying Status Information Displaying Clock Turning the Monitor(PDP) On and Off Turning the Monitor(PDP) On and Off 2 1 Viewing the Menus and Displays Page 23 Connecting Speakers Connecting PDP and Speakers / Stand and Speakers 22 Connecting a VCR/Cable Box Videotape Playback: Picture Control Connecting a DVD/Set-Top Box 24 To Play DVD: To Watch DTV: Customizing the Picture 2 Using Automatic Picture Settings 2 Viewing the Picture-in-Picture ! 31 Wide Panorama Zoom1 Changing the Screen Size (When entering the Video mode) Caption Notes 30 Page Customizing the Sound 2 Using Automatic Sound Settings 2 Time Setting Using the Surround down to select the AUDIO, then press the joystick to enter. Surround, then move the joystick left or right to select the Concert, Hall or Stadium. SOUND Setting the Clock 2 4 3 2 Setting the Timers 6 5 4 3 Connecting PC and Operation Pin Configuration Setting up Your Monitor Plug and Play Connecting a PC to the PDP Connecting to a PC 4544 To watch the PC screen: 47 * How to Set up Your Display Setting (Windows only) 49 After connecting the PDP to your PC, adjust the position of screen if it is not well-aligned. 2 48 Adjusting the PC Screen Changing the Position of the Image 3 2 Changing the Size of the Image Enlarge of the Image (Zoom) Picture Automatic Adjustment On/Off 3 Move Expanded Picture Picture Quality Adjustment Fine Tuning (Phase) 3 Frequency Adjustment 2 3 5756 Information Power Saver (PC mode only) State Normal Operation Power-saving Function Mode Page Selecting a Menu Language Setting the Multi Control 5 4 3 Using the Key Lock 2 Setting up Your Remote Control Appendix 6766 Troubleshooting Care and Maintenance Problem Possible Solution Identifying Problems Specifications Memo