Samsung PPM50H2 Information Power Saver (PC mode only)

5756
Preset:
•Press the RGB button to select the PC mode.
1 Press the Menu button. Move the joystick up or
down to select the SETUP, then press the joystick to
enter.
2 Move the joystick up or down to select the “Miscel-
laneous”, then move the joystick left or right to
enter.
3 Move the joystick up or down to select the “Informa-
tion”, then move the joystick left or right to enter.
4 Press the Menu button to exit.
Information Power Saver (PC mode only)
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Information
Multi Control
Key Lock Off
Move Adjust Exit
Resolution
Frequency
Horizontal Vertical
1024 768
48.3KHz 60Hz
Exit
This monitor has a built-in power management system called Power Saver. This power management
system saves energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. This power management system operates with a VESA DPMS compliant video
card installed in your computer. You use a software utility installed on your computer to set up this fea-
ture. See the table below for details.
Table 1. Power-saving modes
Notes:
•This monitor automatically returns to normal operation when horizontal and vertical sync return.
•This occurs when moving the computer’s mouse or pressing a key on the keyboard.
•For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattend-
ed for long periods.
State Normal
Operation
Power-saving Function Mode
Inactive
Active
Blanked
Amber Blinking
(1 sec Interval)
Active
Inactive
Blanked
Amber Blinking
(1 sec Interval)
Inactive
Inactive
Blanked
Amber Blinking
(1 sec Interval)
Horizontal Sync
Vertical Sync
Video
Power
Indicator
Active
Active
Active
Green
Standby Mode Suspend Mode
Position A1 Power-off Mode Position A2