Samsung PPM50H2 Connecting to a PC

Pin Configuration

• 15Pin Signal Cable (based on protruded pin)

Setting up Your Monitor Plug and Play

Our adoption of the new VESAPlug and Play solution eliminates complicated and time consuming

setup. It allows you to install your monitor in a Plug and Play compatible system without the usual

hassles and confusion. Your PC system can easily identify and configure itself for use with your display.

This monitor automatically tells the PC system its Extended Display Identification data (EDID) using

Display Data Channel (DDC) protocols so the PC system can automatically configure itself to use the flat

panel display.

Connecting to a PC

This PDP set is not compatible with Macintosh PC.

4544

Connect a PC (15pin) or BNC cable between the Video Output jack on the PC and

the RGB1 (15p D-SUB) or RGB2 on the PDP.

• You can attach the Ferrite Coresto each jack of the BNC cable.

• For an explanation of Component video, see your PC owner’s instruction.

Connect a Audio cable between the Audio Output jack on the PC and the Audio Input (PC)

on the PDP.

To watch the PC screen:

1. Turn on PDP and press the RGB button to select the PC mode.

2. Turn on PC and check for PC system requirements.

(Refer to pages 46 and 47 for PC system requirements.)

3. Adjust the PC screen. (Refer to page 48.)

Connecting a PC to the PDP

PC (15pin)

Cable BNC

Cable

Audio Cable

Power Plug

1

2

Contents

Main Important Safety Information Warning! Important Safety Instructions Thank You for Choosing Samsung 32 FCC Information Setup Connection (Connecting Speakers / Receiver) Picture Control Sound Contro Important Warranty Information Regarding Television Format Viewing User Instructions 6 Table of Contents Screen Image retention Page Front Panel Your New Plasma Display Panel Rear Panel Remote Control Buttons Remote Control 1 3 2 Wall Installation Instructions 1 2 3 4 14 Wall attachment panel 4 5 6 Separating the Display from the Wall Attachment Panel Displaying Status Information Displaying Clock Turning the Monitor(PDP) On and Off Turning the Monitor(PDP) On and Off 2 1 Viewing the Menus and Displays Page 23 Connecting Speakers Connecting PDP and Speakers / Stand and Speakers 22 Connecting a VCR/Cable Box Videotape Playback: Picture Control Connecting a DVD/Set-Top Box 24 To Play DVD: To Watch DTV: Customizing the Picture 2 Using Automatic Picture Settings 2 Viewing the Picture-in-Picture ! 31 Wide Panorama Zoom1 Changing the Screen Size (When entering the Video mode) Caption Notes 30 Page Customizing the Sound 2 Using Automatic Sound Settings 2 Time Setting Using the Surround down to select the AUDIO, then press the joystick to enter. Surround, then move the joystick left or right to select the Concert, Hall or Stadium. SOUND Setting the Clock 2 4 3 2 Setting the Timers 6 5 4 3 Connecting PC and Operation Pin Configuration Setting up Your Monitor Plug and Play Connecting a PC to the PDP Connecting to a PC 4544 To watch the PC screen: 47 * How to Set up Your Display Setting (Windows only) 49 After connecting the PDP to your PC, adjust the position of screen if it is not well-aligned. 2 48 Adjusting the PC Screen Changing the Position of the Image 3 2 Changing the Size of the Image Enlarge of the Image (Zoom) Picture Automatic Adjustment On/Off 3 Move Expanded Picture Picture Quality Adjustment Fine Tuning (Phase) 3 Frequency Adjustment 2 3 5756 Information Power Saver (PC mode only) State Normal Operation Power-saving Function Mode Page Selecting a Menu Language Setting the Multi Control 5 4 3 Using the Key Lock 2 Setting up Your Remote Control Appendix 6766 Troubleshooting Care and Maintenance Problem Possible Solution Identifying Problems Specifications Memo