Rear of the PDP Display

1 Connect the PC cable between the PC IN and PC OUT on the rear of each PDP in the form of daisy chain.

2 Connect the PC cable between the RGB IN on the rear of the last connected PDP and the PC OUT on the rear of the PC.

Example for Multiple Display Control connections

Rear of the PDP Display

1 Connect the RS232C cable between the RS-232C IN and RS-232C OUT on the rear of each PDP in the form of daisy chain.

2 Connect the RS232C cable between the RS-232C IN on the rear of the last connected PDP and the RS-232C OUT on the rear of the PC.

➢Select ID input on the menu. Use the numeric buttons to enter the ID for PDP Display adjustment. You can operate the remote control only for the PDP Display that has been selected.

For details about Multiple Display Control, refer to “Setting the MDC (Multiple Display Control)” on page 24.

English - 10