Samsung Q1235(C/S/V), Q1435(C/S/V) Installing the Washing Machine, Unpacking the Washing Machine

Models: Q1636(C/S/V) Q1236(C/S/V)

1 13
Download 13 pages 37.12 Kb
Page 3
Image 3
Installing the Washing Machine

Installing the Washing Machine

Unpacking the Washing Machine

Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the items shown below. If the washing machine was damaged during shipping or you do not have all of the items, contact your Samsung dealer immediately.

Overview of the washing machine

 

Worktop

 

Detergent

 

drawer

Control panel

Drain Hose

Door

 

 

Plug

Base cover

 

Adjustable feet

Debris filter

 

 

Door release

 

Emergency drain

 

tube

 

Filter-cover

 

Cold Water

Wrench

supply hose

 

 

Drain Hose

Hose guide

Bolt hole

covers

 

Installing the Washing Machine

Selecting a location

Before you install the washing machine, select a location with the following characteristics:

A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)

Away from direct sunlight.

Adequate ventilation

Room temperature that will not fall below 0 ˚C

Away from sources of heat such as coal or gas

Make sure that the washing machine does not stand on its power cord.

Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Adjusting the leveling feet

If the floor is uneven, adjust the feet

(do not insert pieces of wood or any other objects under the feet):

1. Loosen the leg bolt by turning it with your hand until it is at the desired height.

2.Tighten the locking nut by turning it

with the supplied wrench.

If the washer is placed on an uneven or weak surface, noise or vibration occurs.

(Only l degree angle is allowed.)

Removing the shipping bolts

Before using the washing machine, you must remove the five shipping bolts from the back of the unit. To remove the bolts:

1.Loosen all bolts with the supplied

wrench before removing them.

2. Take each bolt head and pull it through the wide part of the hole.

Repeat for each bolt.

3.Fill the holes with the supplied plastic covers.

4.Keep the shipping bolts for future use.

2 SAMSUNG Washing Machine Owners Instructions

SAMSUNG Washing Machine Owners Instructions 3

Page 3
Image 3
Samsung Q1235(C/S/V) manual Installing the Washing Machine, Unpacking the Washing Machine, Overview of the washing machine