TEMPERATURE CONTROL(RA15*)
PREPARATIONS FOR USE
Follow the proceeding steps in order,if the unit is not functionning properly,check electricitysupply.When the cause of trouble can not be located,contact your dealer..
1.Place all shelves, all kinds of vessels in their proper positions which have been removed for transportation.
2.Clean refrigerator and parts to remove dust incurred during shipping.
3.Set cold control knob at "COLD" position and let refrigerator operate for one hour. Freezer compartment should get slightly chilled and motor should run smoothly with no noise but soft hum.
4.Store food after the temperature in the refrigerator gets suffi ciently low. It takes a few hours after starting the refrigerator to reach the proper temperature.
5.Your refrigerator is operated by a compressor which switchs "on and off" to maintain the intemal temperature. When the compressor is new it requires running in for a period of up to 2 months.During this period it may operate a little noiser than normal. This is quite normal and does not represent a fault.
CONTROL SETTINGS (RA15*)
The temperature control maintains the temperature in the refrigerator. Setting the control at COOL is the warmest setting. Setting the control at COLDEST is the coldest setting. Set the control at COLD.
Allow 24 hours for the refrigerator to reach the COLD temperature. If you want a colder or warmer temperature,move the dial one setting at a time. Moving the control to OFF stops cooling but does not turn off the power to the refrigerator. Setting the control to one of the snowflake positions may cause freezing the refrigerator depending on the room temperature.
How To Test Temperatures
Use the milk test. Place a container of milk on a shelf and check it a day later. If the milk is too warm or too cold, adjust the temperature control.
After changing the control, allow 24 hours for the refrigerator to reach the temperature you have set.
9