Connect the water line to the fridge
-Connect the plastic line on the back of your fridge to the outlet of cartridge holder (insert plastic line to the cartridge holder outlet until its limit)
-Insert plastic clip to the cartridge holder inlet and outlet.
-Turn water on and check for any leakege.
Cartridge Holder
Clip
Plastic line | Filter cartridge |
- You can purchase the necessary filter cartridge at your nearest Lowe’s, make sure you buy SAMSUNG filter NOTE cartridge (Replacement cartridge No :
-Waterline must be connected to drinkable water only
-For using without water filter
Connecting to water supply line
- Shut off the main water supply line and turn the
Ice maker to the off position. - Locate the nearest cold drinking water line. - Follow the instructions in the ice maker
installation kit.
1.Cold Water line
2.Pipe Clamp.
3.Copper (or Plastic) line
4.Compression Nut
5.Compression Sleeve
6.Shut Off Valve
7.Packing Nut.
Connect the water line to the fridge
-Slip the compression nut through the plastic tube.
-After inserting the compression nut into plastic tube, tighten the compression nut onto 1/4” compression fitting(union).
Do not overtighten the compression nut.
NOTE
-Slip the compression ferrule and nut on copper(or plastic) tubing as shown.
After inserting the sleeve, tighten the compression nut onto the compression fitting(union).
-Turn water on and check for any leakege.
Compression
Nut
Ferrule
Sleeve
Compression
fitting
Compression
Nut
- You can purchase the necessary filter cartridge at your nearest Lowe’s, make sure you buy SAMSUNG filter NOTE cartridge (Replacement cartridge No :
-Waterline must be connected to drinkable water only
-Compression fitting and nut will be given inside of ice bucket.
14
