Samsung RF62QERS1/EUR manual Removing and Relocating the Fridge Accessories, Twist Ice Maker Model

Twist Ice Maker Model

1.Pull out the Ice-cube trays.

2.Fill trays up to the water level mark(arrow).

3.Put the Ice-cube trays back in position. And close the freezer door.

4.Once the water has become frozen, turn the dials on the Ice cube trays to empty Ice cubes into the storage bin.

1 2

3 4

REMOVING AND RELOCATING THE FRIDGE ACCESSORIES

1. Door Bins

To remove - Simply lift the bin up and pull straight out.

To replace - Slide it in above the desired location and

push down until it stops.

Injury may occur if the door bins are not firmly

CAUTION inserted. Do not allow children to play with bins. Sharp corners of the bins may cause

3. Vegetable & Fruit Drawers	1
To remove - Pull the drawer out
to full extension.
Tilt up the front of
the drawer and pull
straight out.	2
To replace - Insert the drawer
into the frame rails	02operating
and push back into
place.

The drawers need to be removed before the glass shelf above them can be lifted out.

To get the best energy efficiency of this product, please leave all selves, drawers and baskets on their original position like as illustration in page 21

REMOVING THE FREEZER

ACCESSORIES

1. Pull Out Drawer

To remove - Pull the drawer out to full extension. Tilt up rear of drawer and lift straight out. (Refer to picture 1 & 2)

Open the freezer door fully and remove the drawer.

To replace - Place the drawer onto the rails by tilting it up. Lower the drawer into place until it is horizontal and slide the drawer in.

(Refer to picture 3)

injury.

Empty the bin before adjusting it.

Dust removal method -Remove the guard and wash in water.

2. Fridge shelves

To remove - When pulling out the shelf, if it does not slide out easily, lift it

1

1

2

2

3

3

up slightly and pull out again.

To replace - When pushing in the shelf, if it does not slide in easily, lift it up slightly and push in again.

The Glass shelves are heavy.

CAUTION Use special care when removing them.

2.Freezer Drawer Bin Swing-Type

To remove - Pull the drawer out fully. Tilt up the rear of the bin and lift it out to remove.

To replace - Place the bin into the rail assembly.

When replacing, place the drawer bin holder into the hole of the rail

1

2

operating _23