PREPARATIONS BEFORE USE
PRIOR TO USE
Remove the four sponge tapes from the two ends of glass shelf and adjust the shelf at the proper position.
Clean the inner and outer of the appliance using warm and wet cloth (some detergent is allowed in the warm water)
The refrigerator is set under the initial status, refer to temperature control
Caution:
After using the freezer, don't forget to shut the drawer before closing the door.
Before electrifying the appliance, please check whether the rated voltage is in parallel with the power source. The rated voltage is permitted within
ASSEMBLING OF BOTTLE RACK
MAINTENANCE & CLEANING
Interior parts
Dismantle all shelves, bars, trays, covers and drawers, and clean with a warm damp cloth wiper.
Door gasket
Clean door gasket with care. Wipe the recessed place with chopstick wrapped with cotton strip.
Water tray
Screw off the screw in the compressor cover, pull up the water tray lightly and draw it out. Fix it as before after washing.
Defrost approach
Thick frost layer depositing on the interior wall will affect refrigeration effects. On that account, you may cut off the power after taking out the foods and placing somewhere in good package. Wipe off the water soil with a soft cloth when the frost layer thaws. Afterwards, switch on the power and restart the machine to reset the temperature.
Cautions:
Before assembling |
After assembling |
Fix the bottle rack onto the glass shelf as described in the left demonstration.
Never place the refrigerator upside down and horizontally. If titling is required, the angle between compartment body and the ground shall be at least 45 .
In the initial use, remove the four sponge tapes from the glass shelf and fit the shelf.Embed the protuberance at both sides to the grooves to fix them properly.
Never move the refrigerator by door handle or impose large force on the handle up and down.
The intervals between plug pulling and plugging shall be more than 5 minutes.
4 | 9 |
