HOW to USE, Fruit and Vegetable Compartment

HOW TO USE

MECHANICAL TEMPERATURE ADJUSTMENT

	The temperature is adjusted by the slide under the
	control of temperature controller. The signs, strong ,
	mediate and weak , on the knob receptively indicate

	the inside temperature condition. Under the same
	circumstance, stronger the knob reflects, lower the
Season switch	inside temperature is. Close means stopping working.
	Temperature adjustment
	In normal use, adjust the slide at the mediate		and
	change it to the location between weak and		mediate
	if any hot weather. If the room temperature is below
	15 , then open the season switch and change the
	slide to the location between mediate	and strong .
	If the room temperature is below 10	, it's a must to
	locate the slide at the Winter area.

FRUIT AND VEGETABLE COMPARTMENT

DISASSEMBLING PARTS

Refrigerator shelf

Draw out it till the block, lift the shelf rear and pull it out.

(position the shelf as per the container's height)

Fruit and vegetable tray and cover

Pull out the fruit and vegetable tray.

Drive up the cover head and put it out.

Freezer tray

Draw out it till the block, lift the shelf rear and pull it out.

Egg guard and bottle guard

Lift them up to dismantle it.

Cover

Moisture

control slide

Fruit and

vegetable

tray

Partition

You may adjust the moisture of the fruit and vegetable compartment by the moisture control slide. The slide towards the two sides may increase the moisture, vice versa.

The partition of the fruit and vegetable tray separates the fruit and vegetable compartment into two parts. You are allowed to adjust it according to the fruit and vegetable types and quantities to meet a satisfactory need of storage space.

The fruit and vegetable compartment is able to preserve the water content and freshness of the fruits and vegetables as it is sealed to prevent cold air touching the fruits and vegetables. It is appropriate to the storage of vegetables and fruits.