SAFETY NOTES
NOTES
Please refer to product's model and No. while contrasting each other;
Before power supply connected, please make sure the matching between refrigeratory's voltage range and supplied voltage. The optional voltage range is from 220V to 240V; if power supply not meeting the requirement, then the
In case of power supply shutdown, wait for 5 minutes or longer interval for running again lest compressor damaged.
Do not place food near temperature sensor lest negative effects to correct display of temperature sensor;
In hot seasons, avoid to keep door open long time or to open and close frequently, otherwise the efficiency of total set shall be weakened, and the running load shall also be increased.
Keep in mind and do not reverse or make it lie down. If necessary to make it incline,the gradient between cabinet and ground should be less than 45 degree;
Do not move it by holding door handle; or to pull or draw the door handle forcibly;
If abundant hot items placed in at one time, keeping it open long time or opening frequently, the cabinet temperature shall be increased, and temperature display also flashes. usually it shall recover within 24 hours.
The appliance must be installed so that the plug is easily accessible .
WARNING
Keep ventilation openings, in the appliance enclosure or in the
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
PRE-RUNNING ISSUES
1. Remove all package material and remove bottom pad before running.
2. Make the interior and external clean with mild wet cloth ( little natural cleaner can be added to mild water).
3. Keep it ready and after 1 hour, plug in the power supply. Please refer to the upper indication and conduct relative operations.
DISMOUNT METHOD OF ATTACHMENT
Attachment application
Refrigerator shelf
Lift the shelf head and pull it out. (Position the shelf as per the container height)
Fruit Box Cover
To raise up the rear portion, then take it out.
Freezer tray
Draw out it till the block, lift the shelf rear and pull it out.
In case of heavy food stuff preserved in the drawer, hold drawer up slightly and pull it back.
Egg guard and bottle guard
Lift them up to take them down.
Cabinet Lamp Replacement
Draw out the plug of power supply
To loose the screw behind the lamp cover. And take out lamp cover by means of unclenching along its edge with flat
To screw out the bulb anti-clockwise.
To screw in new bulb clockwise.
To embed lamp cover again and fix the screw behind lamp cover.
Lighting lamp specification: 220/240V, 20W ,E14
4 | 13 |