Samsung RL67SBTS1/SML manual Using the Water Dispenser Option, Overview, Filling the water tank

Models: RL62SBSH1/SML RL62SBTS1/SML RL67SBVB1/SML RL67SBSW1/SML RL67SBSH1/SML RL67SBTS1/SML RL62SBPN1/SML RL62SBSW1/SML RL62SBVB1/SML

1 32
Download 32 pages 22.02 Kb
Page 26
Image 26

operating your samsung refrigerator

USING THE WATER DISPENSER (OPTION)

You can easily obtain chilled water with the water dispenser without opening the refrigerator door. In addition, you can save electricity by reducing the number of times the door is opened by more than 30%.

Overview

Press lever

Locking device

Water tank cap

Water tank

Water supply device

When the water dispenser is not in use, the following is recommended

1. Fix the water supply device tightly into the fixing hole.

• The door will not close automatically when the water supply device is pulled out for a long time due to the leakage of cold air.

2. Place a spare beverage bottle by the exclusive water tank.

Two 1.5 litre bottles can be used.

3.Set the locking device to the “LOCK”

When pressing the “PUSH” button with the water supply device only fixed at the fixing hole, and the locking device is set on “OPEN”, the water supply device can be removed from the fixing hole and cold leaks.

When exposing to child, set the locking device to the “LOCK”.

Filling the water tank

1.Open the water tank by removing the round cap and fill it with drinking water. (Do not use hot water.)

Fill the tank up to the full level (just below 4.2 litres).

2.Replace the round cap by pushing down on it until it clicks into place.

1

2

3

3. Place a cup on the cup support, then press the “PRESS” lever.

26_ operating

Page 26
Image 26
Samsung RL67SBTS1/SML, RL62SBVB1/SML, RL62SBPN1/SML manual Using the Water Dispenser Option, Overview, Filling the water tank