12.Use wrench to separate the hinge shaft and then flip the hinge and reattach the hinge shaft. And remove the shim at the top and attach it to the other side.
13.Reassemble the hinge on the refrigerator door by reversing the step 11.
Make sure to use left side hinge cover (which can be found underneath the removed plastic cover from step 2) and remove the grommet. After reassembling the hinge, wire and the hinge cover, switch the side from right to the left.
Grommet
14.After switching the hinge, close it with the wire cover on the top of refrigerator door.
“Cover Wire Door R” can be found in the packaging
15.Take off the handle cover and remove the screws, make sure to detach the caps and the handle from the left to right side of the door. (Make sure to cover the left side with detached caps.)
up setting
Handles may not have cover depending on the models.
16.Switch the hinge cap and attach the front leg cover.
Carefully put the refrigerator door back on.
Hinge cap
17.Tighten the 3 bolts and then connect the wires back together.
Make sure your refrigerator is unplugged WARNING before handling electrical wires.
English - 15
| 2014. 8. 13. |
��
6:23
