CONTROL PANEL (RS20BR**/RS20CR**)

INSTALLING REFRIGERATOR

LEVELLING

When you adjust the refrigerator level, set the front legs slightly higher than the rear legs so that you can open and close the doors more easily.

First disassemble the leg cover and then adjust the refrigerator level.

If your refrigerator tilts towards the left,

If your refrigerator tilts towards the right,

turn the left adjusting leg.

turn the right adjusting leg.

Power Freezer

Speeds up the freezing process in freezer.

Freezer

To set the freezer temperature, press this button repeatedly to change the set temperature in sequence between -14 and -25 .

Power Cool

Speeds up the cooling process in fridge.

Fridge

To set the fridge temperature, press this button repeatedly to change the set temperature in sequence between

1 and 7 .

DIGITAL PANEL

Freeze Temp: indicate the current freeze temperature. Fridge Temp: indicates the current fridge temperature.

Power Freeze • This light is on when you pressure the Power Freeze button.

? Press this button to make the freezer reach the set temperature quickly.

• Press this button again to cancel the Power Freeze mode.

Power Cool • This light is on when you press the Power Cool button.

? Pressure this button to make the fridge reach the set temperature quickly.

• Pressure this button again to cancel the Power Cool Mode.

The inside temperature of the applicance will increase if a large amount of hot articles are stored at Note the same time, or the doors are opened frequently or for a long time.

4

EARTHING THE APPLICANCE

WARNING

The appliance must be earthed before use.

You must earth the refrigerator to prevent any power leakage or electric shock caused by current leakage from the appliance.

Never use gas pipes, phone lines or other potential lightning rods as earthing.

Never use unearthed power plug.

Connect the earthing wire (yellow/green or green). Earthing wire

Copper pipe

Earthing screw

INSTALLATION INSTRUCTIONS