Installing on the Wall
1Removing the Stand
Using a hexagonal wrench, remove the stand.
2Removing Rubbers
Remove the four rubbers from the edges.
3Mounting on the Wall
Mount the stand on the wall using screws or nails.
4Fixing the Set
Using a hexagonal wrench, fix your set into the stand.
☛Installation Notes
◆Do not install your set on any place other than vertical walls.
◆To protect the performance of your set and prevent troubles, avoid the followings:
-Do not install next to smoke and fire detectors.
-Do not install in an area subjected to vibration or high voltage.
-Do not install in the wall.
-Do not install near or around any heating apparatus.
◆Use only recommended parts and components.
