Making small adjustments between doors.
Please open the doors and adjust the doors as follows:
1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn NOTE the bolt(➁) a little counter clockwise to make the nut(①) loose with
your fingers.
Adjustment part
➂WRENCH
2) Please adjust the height difference between the doors turning
the bolt (➁) turn clockwise( ) or counter clockwise
( ).
When you turn clockwise ( ), the door goes up.
NOTE
➀NUT
➁BOLT
➂WRENCH
3) After adjusting the doors, turn the nut (①) turn clockwise
( ) until the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
➁BOLT
➂WRENCH
If you do not fix the nut (①) firmly, the bolt (➁) may be released.
NOTE
➀NUT
➁BOLT
28