CHECKING THE WATER DISPENSER LINE (OPTIONAL)
1)In order to operate the ice maker properly, water pressure of 1.4 ~ 10 kgf/cm2 is required. In this range a 100 cc paper cup can be filled in 10 seconds.
2)The water filter removes particles. It does not sterilize or destroy any
3)If the refrigerator is installed in an area with low water pressure (below 1.4kgf/cm2), you should install a booster pump to compensate for the low pressure.
4)Ensure the water storage tank inside the refrigerator is preperly filled initially. Push the water dis penser lever until the water runs from the outlet.
A universal water supply kit is available at extra cost from your dealer. The refrigerator manufacturer NOTE recommends using a water supply kit containing copper tubing.
Checking the Parts
Purifier
(Interior model)
Sealing tape
Clip A x 8EA
Tapping screw x 12EA
Water line | Purifier lock | |
station | ||
| ||
Purifier | Tightening band | |
|
(Exterior model)
INSTALLATION INSTRUCTIONS
27