CRITICAL INSTALLATION WARNINGS

Do not install the refrigerator in a damp location or place where it may come in contact with water. -- Deteriorated insulation on electrical parts may cause an electric shock or fire.

Do not place this refrigerator in direct sunlight or expose it to the heat from stoves, room heaters, or other appliances.

Do not plug several appliances into the same multiple power strip.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the voltage listed on the refrigerator’s rating plate.

-- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

If the wall socket is loose, do not insert the power plug. -- There is a risk of electric shock of fire.

Do not use a cord that shows cracks or abrasion damage along its length or at either end.

Do not bend the power cord excessively or place heavy articles on it.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.

-- When moving the refrigerator, be careful not to roll over or damage the power cord -- This may result in an electric shock or fire.

Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.

-- Damage to the cord may cause a short-circuit, fire, and or electric shock.

• Do not use aerosols near the refrigerator.

-- Using aerosols near the refrigerator may cause an explosion or fire.

Do not install this appliance near a heater or inflammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

Do not install this appliance in a location where gas may leak.

-- This may result in an electric shock or fire.

This refrigerator must be properly located and installed in accordance with the instructions in this manual before you use it.

Connect the power plug in the proper position with the cord hanging down.

-- If you connect the power plug upside down, the wire can get cut off and cause a fire or electric shock.

When moving the refrigerator, be careful not to roll over or damage the power cord. -- This constitutes a fire hazard.

Make sure that the power plug is not squashed or damaged by the back of the refrigerator.

Keep the packing materials out of reach of children.

-- There is a risk of death from suffocation if a child puts the packing materials on his or her head.

The appliance must be positioned so that the plug is accessible after installation. -- Failing to do so may result in an electric shock or fire due to electric leakage.

You need to remove all the protective plastic film before you initially plug the product in.