Samsung RS261M** instALLinG tHE wAtER LinE, Connecting the water line to the Refrigerator

setting up your side-by-side refrigerator

instALLinG tHE wAtER LinE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection.

You may find these items sold as a kit at your local hardware store.

• 1/4” compression nut	• plastic tubing
• copper tubing	• ferrule		Refrigerator
		Plastic tubing	Compression nut
			(1/4”) (Supplied)
		(Supplied)
			Compression fitting
			(Supplied)
		Ferrule	Bulb
		(Not supplied)	Compression nut
			(1/4”) (Not supplied)
		Copper tubing or Plastic tubing
		(Not supplied) (Not supplied)

Household water line

1.Slip the compression nut through the supplied plastic tubing .

2.Tighten the compression nut onto the 1/4” compression fitting.

-If you are using copper tubing, slip the compression nut (not included) and ferrule (not included) on copper tubing (not included) as shown.

-If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the compression fitting.

Do not use without the molded end(Bulb) of the plastic tubing .

CAUTION

3.Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut .

4.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4” of the plastic tubing to make sure you get a snug, leak-free connection.

18_ setting up