Ice Off
This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced. When Ice Off blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.
Child Lock
This icon will light up when you activate the Child Lock function by pressing Child Lock button. Press this button again to reactivate. Use this function to prevent children from tampering with temperature and filter settings.
Canceling Exhibition Mode
In case of Exhibition Mode, It seems working but doesn’t make cool air. To cancel this CAUTION mode, press the Power Freeze and Freezer buttons at the same time for 8 seconds
until
Exhibition mode
Controlling the temperature
Basic Temperature of Freezer and Fridge
The basic and recommended temperature of Freezer and Fridge compartments are
If the temperature of Freezer and Fridge compartments are too high or low, adjust the temperature manually.
Controlling the Freezer temperature
The freezer temperature can be set between
The temperature display will move sequentially from
Five seconds after the new temperature is set the display will again show the actual current freezer temperature. However, this number will change as the Freezer adjusts to the new temperature.
Controlling the Fridge temperature
The refrigerator temperature can be set between 7ºC and 1ºC to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin tracking towards the newly set temperature. This will be reflected in the digital display.
The temperature of the freezer or the refrigerator may rise from opening the doors too frequently, or if a large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the freezer and refrigerator return to their normal set temperatures the blinking will stop.
If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the appliance, wait about 10 minutes and then plug back in.