setting up your side-by-side refrigerator

SETTING UP the refrigerator doors

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise.

Separating the Water Supply Line from the Refrigerator

1. Remove the water line by pressing the coupler 1 and pulling the water line 2 away.

01TTINGSE UP

:

Be careful that the

 

1

water tube match same

 

color.

2

Reattaching the Water Supply Line

1.Water line must be fully inserted to the marked line to prevent water leakage and water dripping of water dispenser.

Line

Line

Coupler

Coupler

2. Insert the 2 clips in the install pack and check that each clips holds the line firmly.

clip A

clip A

(6.35mm)

(6.35mm)

Coupler

Do not cut the water line. Gently separate it from the coupler.

setting up _11