setting up your side-by-side refrigerator
Remove any residual matter inside the purifier. (Model with the purifier)
01
-Open the main water tap to check whether water is running through the water tube on the water inlet side of the purifier.
-If water does not come out through the line, check whether the tap is open.
-Leave the tap open until clean water is running out and any residual matter that built up during manufacturing has been removed.
OUTLET SIDE | PURIFIER |
OF PURIFIER | |
WATER | WATER LINE |
|
SETTING UP
Attach the purifier lock-clip.
-Hold the purifier
(under the sink for example) and fix it tightly into place where to screw.
Purifier
WATER TUBE
Secure the purifier in position.
- Fix the purifier in position, as shown in the figure on the right.
Connect the water line to the refrigerator.
-Remove the compressor cover of the refrigerator.
-Connect the water line to the valve, as shown in the figure.
- When connected, check if there is any leakage. If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.
Purifier
PURIFIER
WATER LINE
CONNECTION NUT
INSTRUCTIONS
COMPRESSOR COVER OF
REFRIGERATOR
Secure the water line.
- | Using clip ”A”, fix the water line to the wall (the back of refrigerator). | CLIP A |
- | When the water line is secure, make sure whether the water line is not |
|
| excessively bent, pinched or squashed. | WATER LINE |
|
|
setting up _21