User Controls

On-Screen

Display

English > Main > Adjusting Your Monitor > User Controls > Direct-Access Features

User control buttons

Direct-Access Features

Direct-Access Features let you display Monitor Adjustment Menu by simply pressing Auto button once. Or they are used to adjust monitor functions. You need to activate functions other than Auto Adjustment only when Auto-Access Features are off.

Automatic Save OSD Lock/Unlock Volume Channel

1. Automatic Save

The monitor display becomes more stabilized if adjusted by Auto Adjustment functions when the monitor is installed for the first time. Try Auto Adjustment before attempting Manual Adjustment. Ensure the clock frequency of the monitor matches that of the computer video card before carrying out Auto Adjustment.

When the Auto button is pressed, the monitor screen turns black and the Auto Adjustment screen appears as shown in the animated screen on the left.

To make the automatic adjustment function sharper, execute the 'AUTO' function while the AutoPattern.exe is on.

2. OSD Lock/Unlock

This function allows you to secure the current settings so that they cannot be inadvertently changed.

With the OSD screen off, push and hold the Menu button for at least 5 seconds to lock or unlock the controls.

The following functions are available even while the OSD menu is locked.

1.Control buttons Source button (PC, PIP, Video, Audio mode button) Volume button, Channel button, Menu button, Exit

 

button, Auto button

2. PC Screen

Brightness, Contrast

3. TV Screen

Channel, Volume

With the OSD screen off, push and hold the Menu button for five or more seconds to unlock the OSD settings.

This function is activated by pressing the Menu button on the front panel of the monitor. (It is not available by pressing the Menu button on the remote controller.)

3. Volume

When OSD is not on the screen, push the VOL - / VOL + button to adjust volume.

1.Push the button to decrease the volume.

2.Push the button to increase the volume.