REPLACING THE LAMP
1 | Press upper tab of the lamp cover with |
some tool such as |
- driver and pull it out.
| 2 | - Turn the existing lamp bulb and replace |
| it with a new one. | |
|
| - Replace the lamp cover by aligning the |
|
| cover at the top and carefully pressing |
|
| it into place. (There are one or two |
Loosen | Fasten | lamps according to the model) |
|
BASIC PREPARATION
Before using
Wipe the appliance inside and outside using a cloth dampened with warm water and a small amount of detergent.
Before plugging in for the first time, allow the refrigerator to stabilize for at least one hour. Allow the freezer compartment to cool for 2 to 3 hours before storing food.
NOTE : Most power failures that are corrected in an hour or two will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off. But should the power failure last more than 24hours, remove all frozen food.
The keys should be kept out the reach of children and not in the vicinity of the appliance.
10