INITIAL OPERATION
It should be satisfied when you test the refrigerator following below items. If not, check power supply and electricity state. If you can not any control, contact SAMSUNG service center.
1 | Place the shelves and containers | 4 | Set temperature control to “HIGH” | |
which were removed for transportation | position and let refrigerator operate for | |||
in their appropriate positions. | one hour. The freezer compartment | |||
(refer to pages 21~24) | should get slightly chilled and the | |||
| ||||
|
|
motor should run smoothly producing a soft humming noise.
2 | Clean refrigerator and parts to remove | 5 | Store food after the temperature in the |
dust incurred in shipping and packing. | refrigerator gets sufficiently low. | ||
(refer to pages 26~27) | It takes a few hours after starting the | ||
| refrigerator to reach the proper | ||
|
| ||
|
|
|
temperature.
When you plugged the refrigerator in,
3 interior lamp should light on during refrigerator door is opened.
Your refrigerator is operated by a compressor which switchs “on and off” to maintain the internal temperature. When the compressor is new, it requires a running in period which can last for up to 5 months. During this period it may operate
a little noisily. This is quite normal and does not represent a fault.
6