Changing the Light Bulb(s)

GB

When you open the refrigerator door, a light comes on to help you find what you are looking for more easily. If you need to replace the bulb(s), proceed as follows.

Type A or F

1 Remove the chiller compartment by:

◆ Pulling it towards you until it meets the stop

◆ Tilting the front up slightly and continuing to pull the compartment towards you

2 With a flat-bladed screwdriver, prise out the upper part of the light cover. Pull the cover free.

3Unscrew and remove the two light bulbs.

4 Insert two new bulbs (maximum of 15 W, E14 small screw base).

5 Replace the light cover by pushing it until it clicks back into place.

6Replace the chiller compartment by sliding it back into position.

Type B, C, D or E

1Remove the chiller compartment (types B and E only) by:

◆Pulling it towards you until it meets the stop

◆Tilting the front up slightly and continuing to pull the compartment towards you

2Remove any shelves that are in front of the light cover, by:

◆Lifting them slightly

◆Pulling them towards you

3With a flat-bladed screwdriver, prise out the lower part of the light cover. Pull the cover free.

4Unscrew and remove the light bulb.

5Insert a new bulb (maximum of 15 W, E14 small screw base).

6Replace the light cover by:

◆Aligning the three tabs at the top

◆Pushing the upper part into position first

◆Then pushing the lower part into position

7Replace the chiller compartment and/or any shelves by sliding them back into position.

TEMPCONTROL

TEMPCONTROL

13