+ / - button
ƈYou can use the + / - button to adjust the values for the RGB, ISO, white balance
and exposure compensation.
Main menu Sub menu
Available camera mode
RGB R (Red), G (Green), B (Blue)
ISO AUTO, 50, 100, 200, 400
Exposure compensation
-2.0~0.0~+2.0 (0.5EV steps)
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.
ƈRGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
the images to be captured.
ƃSetting RGB Values
1. Press the + / - button, and then use the UP and
DOWN buttons to select the RGB icon ( ).
The RGB menu bar will appear as shown.
2. Use the UP / DOWN / LEFT and RIGHT
buttons to select the desired RGB value.
- Up / Down Button : Navigates between R, G,
and B icons.
- Left / Right Button : Changes value of each icon.
3. When you press the + / - button again, the value you set will be saved and
RGB setup mode will end.
ŝ29Ş
Movie Clip frame stabiliser + / - button
ſWhen special effect (colour) from the icon other than is selected, it will not
be able to select the RGB.
ƈThis function helps stabilise images captured during movie recording.
1. Press the E button in the Movie clip mode.
2. Press the Left / Right buttons to select the
stabilizer menu tab.
3. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
- : Movie clip frame stabiliser function
becomes disabled.
-: Prevents camera shake during movie recording.
The recording frame range will become narrower than when you
select the menu. Pre-view frames may not display smoothly
on the LCD monitor.
Stabilizer